Here’s Everything You Need To Know About Silicon Wafer

What Is A Silicon Wafer?

A silicon wafer is a thin slice of crystalline silicon typically grown using the Czochralski process, which involves pulling a crystal seed from a molten silicon bath. The wafers are then sliced to a precise thickness, typically ranging from 150 to 725 micrometres (µm), and lapped and polished to achieve a surface roughness of less than 1 nanometre (nm). 

This meticulous process ensures an incredibly flat surface, critical for the precise patterning of electronic circuits.

How Is A Silicon Wafer Made?

Silicon wafers are made using a method called the Czochralski process, also known as crystal pulling. Here is a breakdown of the steps:

• High-Purity Silicon: It all starts with high-purity silicon, often obtained from refined quartzite (a type of rock rich in silicon dioxide).
• Melting & Crucible: The silicon is placed in a crucible made of quartz. This crucible is then heated to around 1412°C, melting the silicon.
• Seed Crystal Introduction: A small, perfectly shaped silicon crystal seed is dipped into the molten silicon.
• Crystal Pulling: The seed crystal is slowly pulled upwards while being rotated. This creates a temperature gradient, allowing silicon atoms to arrange themselves in a specific order, extending the seed crystal and forming a larger cylindrical silicon ingot.
• Precise Control: The pulling and rotation speeds, along with the temperature, are meticulously controlled to ensure a high-quality, defect-free crystal.
• Slicing & Polishing: Once the desired size is reached, the ingot is cooled and sliced into thin wafers using diamond saws. Finally, the wafers are polished to achieve an ultra-smooth surface.

What Is A Silicon Wafer Used For?

The primary use of silicon wafers is in the creation of microchips or integrated circuits (ICs), the building blocks of modern electronics. Beyond microchips, silicon wafers can also have other applications:

• Solar Cells: In some cases, silicon wafers are used as the base for solar cells, which convert sunlight into electricity.
• MEMS (Microelectromechanical Systems): Silicon wafers can be used to create tiny mechanical devices like sensors and actuators.

How Are Silicon Wafers Converted To Chips?

Transforming a silicon wafer into a functional microchip is a complex process known as wafer fabrication. It involves a series of precise steps, often performed in highly controlled cleanroom environments to minimise contamination.

• Photolithography: The wafer is coated with a light-sensitive material called photoresist. Then, a stencil-like mask containing the intricate circuit design is placed on top of the wafer. UV is shone through the mask, hardening the exposed areas of the photoresist while leaving the masked areas unchanged.
• Etching: The wafer is bathed in a chemical solution or exposed to a plasma (ionised gas) that removes the unhardened photoresist. This creates a patterned etching on the wafer’s surface, reflecting the circuit design from the mask.
• Doping: To create specific electrical properties, impurities are introduced into the silicon in a controlled manner, a process called doping. This alters the conductivity of different regions of the wafer, allowing for the creation of transistors and other electronic components.
• Deposition & Patterning (Repeat): Several layers of various materials may be deposited onto the wafer using techniques like chemical vapour deposition (CVD). These layers can be conductors, insulators, or semiconductors, each playing a specific role in the final circuit.
• Metallisation: A thin layer of metal (often aluminium) is deposited to create the conducting pathways that connect the various components on the chip. Photolithography and etching are again used to define the pattern of these pathways.

Testing & Packaging: Once the circuit fabrication is complete, the wafer is rigorously tested to identify and eliminate any defective chips. The functional chips are then separated from the wafer, diced into individual units, and packaged to protect them from damage and facilitate their connection to other components on a circuit board.